Wood Panel Compliance Document Checklist
A wood panel compliance document checklist is the certificate, declaration and test-report list a buyer should collect before paying for a shipment — and the exact list depends on the destination market, the product and how the panels will be used.
Pick your market and product below and the tool returns only the documents that apply, organised so you can forward the result to a supplier as a request for information.
Download Compliance ChecklistCompliance at a Glance
What this compliance checklist does
Two selections — destination market and product type — filter the full compliance map down to what your order actually needs. Each row is marked “supplied by Vital Wood Global” or “confirmed per product and shipment”.
Market and product define your list
| Filter | Options | What it changes |
|---|---|---|
| Destination market |
US, EU, UK, Japan, Middle East, Australia / New Zealand, global default |
Formaldehyde standard, legality mechanism and CE obligations. A report that satisfies the EU may not satisfy California. |
| Product type |
Wood veneer, veneered panel, plywood, MDF, particle board, edge banding |
Composite panels carry formaldehyde obligations that solid veneer does not; structural plywood falls under CE standards. |
| Application (optional) | Structural or decorative | Determines whether a Declaration of Performance is required for the panel. |
What compliance documents do wood panels need?
Five families cover almost every wood panel order, and a compliant supplier file draws from all of them. No single certificate covers all five — a realistic file mixes certificates, test reports and declarations.
| Family | What it covers | Typical document | Applies to |
|---|---|---|---|
| Formaldehyde | Emission limits for composite wood products | Test report or third-party certificate to the correct market standard |
Plywood, MDF, particle board |
| Wood legality & sourcing | Proof the timber was legally harvested | FSC, PEFC, FLEGT licence or CITES permit | All wood products |
| CE & product performance | EU Construction Products Regulation conformity | Declaration of Performance backed by EN 13986, EN 636 and EN 314 |
Construction and furniture panels |
| Chain of custody | Tracking certified material from forest to finished panel | CoC certificate stating the claim type — FSC 100%, FSC Mix or FSC Recycled | Certified orders |
| Prohibited substances & recycled content | Restricted substances and contaminant limits | Supplier declaration plus contaminant test report |
Buyers with extra due-diligence requirements |
A compliant supplier file mixes certificates, test reports and declarations, and the mix changes by market and product — which is exactly what the checklist assembles for you.
Compliance documents by destination market
Each market enforces a different set of rules, and a document that is essential in one is irrelevant in another. Use this map as a starting point and confirm current requirements before ordering, because these rules move.
US · EU · UK · Japan
Middle East · ANZ
| Market | Formaldehyde | Legality & sourcing | Product & CE | Notes |
|---|---|---|---|---|
| United States | CARB Phase II / EPA TSCA Title VI test report and third-party certification | Lacey Act declaration (species, origin, quantity) | — | Label and compliance statement required on the panel; records kept 3 years |
| European Union | E1 / EN 13986 test report | EUDR due-diligence statement plus FSC or PEFC | CE marking and Declaration of Performance (EN 13986, EN 636, EN 314) | EUDR applies to most wood products; geolocation data required |
| United Kingdom | UK equivalent of E1 | UKDR due-diligence plus FSC or PEFC | UKCA marking and DoP | Diverged from EU CE after Brexit; confirm the current UKDR scope |
| Japan | F-star rating (JIS A 5905 / A 5908) | FSC or PEFC where specified | — | F★★★★ is the stricter, most requested rating |
| Middle East | Supplier test report (often E1) | — | — | Requirements vary by country and project; confirm per order |
| Australia / New Zealand | Emission test to local standards | FSC or PEFC where specified | — | Confirm against AS/NZS and import requirements |
Rules move. Use this table as a starting point and confirm the current requirements with your buyer or customs broker before placing the order.
Formaldehyde compliance: CARB, E1, and F-star
Formaldehyde is the most heavily regulated area because composite panels are bonded with adhesives that can release it. The United States, the EU and Japan each use their own standard and test method, so a single report rarely travels between markets.
| Market | Standard | Emission limit | Test method / certification | Note |
|---|---|---|---|---|
| United States |
CARB Phase II / EPA TSCA Title VI |
0.05 ppm hardwood plywood; 0.09 ppm particle board; 0.11 ppm MDF over 8 mm; 0.13 ppm MDF up to 8 mm |
Third-party certifier recognised by the EPA | Label must name the producer, lot number and certifier |
| European Union | E1 / EN 13986 | 0.1 ppm in the test chamber | EN 717-1, EN 717-2 or EN 120 | Assessed under the Construction Products Regulation |
| Japan |
F-star rating (JIS A 5905 / A 5908) |
F★★★★ is the strictest class | Desiccator method JIS A 1460 | Most commonly requested for furniture and interiors |
Ask for the report to be matched to the production batch or lot you are buying, and keep the “confirm per order” line in your supplier agreement.
The US, the EU and Japan use different limits and different test methods. A formaldehyde result that satisfies the EU may not satisfy California, so request the report to the standard your market actually enforces.
Wood legality: FSC, PEFC, FLEGT, and EUDR
Proving Legal Harvest Is Part of the Order, Not an Add-On
Buyers increasingly must prove the timber was legally harvested. FSC and PEFC chain-of-custody certificates are the most common evidence, with FLEGT licensing applying to certain partner countries and CITES permits required for listed species.
These mechanisms overlap but are not interchangeable. Which one your order needs depends on the destination market and the species.
FSC Chain of Custody
Tracks certified material from forest to finished product. The certificate states the claim — FSC 100%, FSC Mix or FSC Recycled — and covers only the certified portion of the order.
PEFC Chain of Custody
The other major forest-certification scheme. It works on the same principle as FSC but through national standards, and buyers often accept either depending on their own policy.
FLEGT Licensing
For countries with a Voluntary Partnership Agreement with the EU, a FLEGT licence proves the timber is legal. It is country-specific and not a substitute for FSC or PEFC.
EUDR Due Diligence
Operators placing wood products on the EU market must submit a due-diligence statement proving the material is deforestation-free, legally produced and low-risk. This requires geolocation data for every harvesting plot — a polygon for plots of 4 hectares or more, a point coordinate below that.
CE marking and declarations of performance
In the EU, wood-based panels used in construction fall under the Construction Products Regulation and must carry CE marking. That marking is backed by a Declaration of Performance, in which the manufacturer declares the panel’s performance against the relevant harmonized standard.
EN 13986 — Wood-Based Panels
The umbrella standard for formaldehyde and performance classes. Panels placed on the EU market under the Construction Products Regulation are assessed against this standard.
EN 636 — Plywood Specification
Sets the specification for plywood, including its exposure class. The exposure class matters wherever moisture resistance is specified for the finished panel.
EN 314 — Bonding Quality
Covers the bonding quality of plywood, which matters where moisture resistance is specified. Bonding performance sits behind the declared performance of the panel.
Declaration of Performance and Factory Production Control
A DoP is not the same as a test report; it is the formal statement that links the product to the standard and the testing. Behind it sits a Factory Production Control system, which is the manufacturer’s ongoing internal control rather than a one-off certificate.
If your panels are used decoratively rather than structurally, CE may not apply — but the same supplier should still be able to provide the E1 formaldehyde result and, where relevant, the DoP. Confirm the panel’s intended use so you request the right document, not the default one.
Build your checklist and download the spreadsheet
The value of this page is not the regulation text — it is the short, correct list for your order. Select your market and product, review the filtered checklist, and download it to share with procurement or forward to a supplier.
Hardwood plywood, MDF and particle board for the US market.
Species, origin and quantity for US-bound shipments.
Formaldehyde result for EU-market composite panels.
Backed by EN 13986, EN 636 and EN 314 where structural.
Includes geolocation data for the harvesting plots.
Claim type stated on the certificate: 100%, Mix or Recycled.
Accepted by buyers whose policy allows either scheme.
Restricted substances and recycled-content contaminant limits.
Confirmed Per Order
FSC, PEFC, CARB, CE, EUDR-related and formaldehyde documents are available per order. We confirm the specifics — product, species and shipment — before you commit, rather than after the goods arrive.
Export and Send
Download the checklist as a spreadsheet and forward it to any supplier as a request for information, or send it to us with a quote request and we will mark each line against what we can supply.
Frequently asked questions
Answers to common questions about wood panel compliance documents, certification and market-specific obligations.
It depends on the destination market. For the US, request CARB Phase II or EPA TSCA Title VI formaldehyde certification and a Lacey Act declaration. For the EU, request an E1 test report, a CE Declaration of Performance and an EUDR due-diligence statement. Most other markets accept FSC or PEFC chain of custody plus an emission test.
They set the same underlying formaldehyde limits, but they are separate programs. CARB Phase II is the California standard; EPA TSCA Title VI is the federal standard that largely aligned with it. A panel certified to one is usually accepted under the other, but confirm which certificate your buyer requires.
It is the formal statement an operator must submit before placing wood products on the EU market, proving the timber is deforestation-free, legally produced and low-risk. It requires geolocation data for the harvesting plots and is filed through the EUDR Information System before customs clearance.
Both certify responsible forest management and offer chain-of-custody tracking, but they are run by different organizations with different national standards. Buyers usually accept either depending on their own policy — confirm which your project specifies before ordering.
CE marking shows a wood-based panel conforms to the EU Construction Products Regulation. It is backed by a Declaration of Performance against harmonized standards such as EN 13986 for wood-based panels, EN 636 for plywood, and EN 314 for bonding quality.
Request a test report or third-party certificate showing the panel meets CARB Phase II and EPA TSCA Title VI limits — 0.05 ppm for hardwood plywood — issued by an EPA-recognized third-party certifier, with a label on the panel naming the producer, lot number and certifier.