WOOD VENEER SPECIES

Wood Veneer Species Database: Compare Color, Grain & Cut

Compare the species we supply by color, grain, cut and cost, so you can shortlist the right face for your product before you order.

Covers oak, walnut, cherry, ash, maple, teak, sapele and ebony, plus burl figures and engineered patterns — each with matching edge banding and typical availability.

Request Samples
SPECIES REFERENCE VENEER DATA

Common Species at a Glance

White Oak Light–medium brown
Walnut Gray-brown–chocolate
Cherry Pinkish-brown, deepens
Teak Golden–dark brown
01 — BROWSE & COMPARE

Wood Veneer Species Database (Browse & Compare)

Quick-reference view of our natural wood veneer species. Cost tiers are relative and depend on grade, cut and quantity, so treat them as a planning guide.

10+ species

Natural, burl and
engineered patterns

Species Color Grain Common cuts Cost tier Matching edge banding Typical use
White Oak Light to medium brown Prominent grain, rays and flecks Plain, quarter, rift Moderate White oak Furniture, cabinets, millwork
Red Oak Pinkish to reddish-brown Bold, arched grain Plain, quarter, rotary Low–moderate Red oak Furniture, doors, panels
Walnut (American) Gray-brown to chocolate Straight to wavy, fine Plain, quarter Moderate–high Walnut Furniture, paneling, millwork
Cherry (American) Pinkish-brown, deepens to red Fine, even, smooth Plain, quarter Moderate Cherry Cabinetry, furniture
Maple Cream to light brown Fine, subtle Plain, rotary Low–moderate Maple Cabinets, interiors
Ash Light to pale brown Bold, straight Plain, quarter Moderate Ash Furniture, doors
Teak Golden to dark brown Straight, naturally oily Plain High Teak Marine, high-moisture, luxury
Sapele / Mahogany Reddish-brown Interlocked, ribbon figure Quarter, plain Moderate–high Sapele Doors, paneling, millwork
Ebony Dark brown to black Fine, straight Plain High Black Accents, inlays, luxury
Burl (walnut, mappa, elm) Figured, swirling Clustered burl figure Sliced, rotary High Coordinated Feature panels, accents
02 — QUICK PROFILES

Common Wood Veneer Species (Quick Profiles)

Three species do most of the work in furniture and interiors: oak, walnut and cherry. The table below adds the supporting species and their key characteristics.

Oak Workhorse
+
Walnut Rich tone
=
Cherry Warm finish
Species Character Best for Production note Availability Matching edge banding
Oak Hard, durable; white oak light–medium brown with rays and flecks; red oak pinkish–reddish with bolder arch Furniture faces, cabinet doors, millwork Plain, quarter and rift cuts available; quarter-cut gives straight flake figure Regular stock Oak
Walnut Rich dark tone; gray-brown to chocolate; fine, even grain; Claro adds darker streaking Furniture, paneling, millwork Usually steamed longer to even out heartwood color — confirm if color consistency matters Regular stock Walnut
Cherry Warm pinkish-brown that deepens to rich red with age; fine, even, smooth grain Cabinetry, high-end furniture Graded hard on color consistency; gum pockets and streaks count against high grade Regular stock Cherry
Ash Light with bold, straight grain; lighter, clean alternative to oak Furniture, doors Similar working properties to oak Regular stock Ash
Maple Cream to light brown; fine, subtle grain; hard and stable Cabinets, painted or lightly finished interiors Common in production furniture Regular stock Maple
Teak Golden to dark brown; straight grain; naturally oily Marine, high-moisture, luxury Moisture resistance from natural oils Produced to order Teak
Sapele Reddish-brown; interlocked, ribbon figure Doors, paneling, millwork Quarters well for ribbon figure Regular stock Sapele
Ebony Nearly black; fine, straight grain Accents, inlays, premium details Used in small quantities, not full faces Produced to order Black
Burl (walnut, mappa, elm) Clustered, swirling figure Feature walls, statement panels Sliced or rotary cut Produced to order Coordinated
03 — NATURAL VS ENGINEERED

Natural vs. Engineered Veneer “Species”

A useful distinction in any species database is between natural veneer and engineered veneer, because they solve different problems. Natural veneer is sliced from real logs; engineered veneer is manufactured from real wood fiber reassembled into consistent patterns.

CONSISTENCY High engineered

Engineered patterns repeat
color and grain across a run

01 Natural
02 Amber
03 Kasla
04 Tang
05 Terminalia
Type Source Variation Best for
Natural species Sliced from real logs Every flitch differs; origin matters (e.g. American vs. English walnut) Authentic character of real wood; one-off and premium work
Engineered patterns Real wood fiber reassembled Consistent color and grain across a large run Hotel, retail and production furniture where every panel must match
Pattern names Amber, Kasla, Tang, Terminalia, Swintonia Not botanical species — behave like a species in specification Large runs needing repeatable appearance
Burl figures Walnut, mappa, elm Clustered, swirling figure Feature walls and statement panels
Engineered Patterns Are Not Species

Patterns like Amber, Kasla and Terminalia are manufactured products, not botanical species. They are specified the same way a species would be. Ask for samples of a specific pattern to confirm its exact color, since engineered looks are best judged in person rather than from a name alone.

04 — CHOOSE BY APPLICATION

How to Choose a Species by Application

The right species usually comes down to three questions: what the surface has to look like, how consistent it must be, and what environment it will live in.

Application Recommended species Why Note
Furniture and cabinets Oak, walnut, cherry, maple Take finish well and stay consistent Pair with matching edge banding to finish the edge
Feature walls and millwork Burl, quarter-cut sapele, sequence-matched oak and walnut Reward figure and continuity Use where grain must run wall to wall
Doors and joinery Ash, oak, sapele Stable and flat, with coordinated banding on the edge Common for interior and exterior joinery
Marine and high-moisture Teak, or engineered patterns Teak resists moisture naturally; engineered gives consistency without natural movement Confirm exposure and finish requirements
01
Not Sure Which Species Fits?

The veneer species selector walks you through it — or tell us the application and we’ll recommend a shortlist with availability.

02
Pair With Matching Edge Banding

Each natural species has a matching edge banding; each engineered pattern has a coordinated color. We supply both together so the edge and face finish as one.

05 — SPECIES IDENTIFICATION

Wood Species Identification (Color, Grain, and Density)

Read Color, Grain and Density Together

Being able to read a species is useful when comparing options or checking a sample. Color is the first identifier, but it varies with finish and age — cherry darkens, walnut is steamed for evenness, oak weathers to grey.

Grain tells you more: oak shows rays and flecks, sapele shows an interlocked ribbon, maple is fine and subtle. Density and hardness explain how the wood behaves.

SPECIFICATION RULE Color first, grain second, density third. Origin matters just as much.
01

Color

First identifier. Varies with finish and age — cherry darkens, walnut is steamed for evenness, oak weathers to grey.

02

Grain

Tells you more than color. Oak shows rays and flecks, sapele shows an interlocked ribbon, maple is fine and subtle.

03

Density and hardness

Explains how the wood behaves. Oak, maple and ash are hard and durable; walnut and cherry are medium and easier to work; teak is dense and naturally oily.

04

Confirm Against Reference Data

We rely on The Wood Database and the ITTO timber database for tropical species. Ask us and we’ll confirm density or Janka value for the exact panel.

06 — AVAILABILITY

Confirm Availability Before You Specify

Common species ship from regular stock; figured and exotic species are produced to order. Use this guide to set expectations before you commit.

01 Stock species Regular stock
02 Figured & exotic Produced to order
03 Engineered patterns Consistent run
04 Samples Confirm in hand
01
STOCK Regular Oak, walnut, cherry, maple, ash, sapele

Common Species Ship From Regular Stock

Oak, walnut, cherry, maple, ash and sapele are widely stocked and can be confirmed quickly. These are the safe choices for furniture, cabinets and interior work.

02
ORDER To order Teak, ebony, burl

Figured and Exotic Species Are Produced to Order

Teak, ebony and burl figures are produced to order. Lead time depends on the specific flitch and grade, so confirm before you commit to a specification.

03
CONSISTENT Pattern Amber, Kasla, Tang, Terminalia

Engineered Patterns Repeat Across a Run

Engineered patterns trade natural variation for consistent color and grain across a large run. They are specified the same way a species would be, and are ideal for hotel, retail and production furniture.

04
SAMPLE In hand Check grain and color

Request a Sample Before You Specify

If a species looks right, request a sample to check the grain and color before you commit. Engineered looks are best judged in person rather than from a name alone.

07 — REQUEST SAMPLES

Confirm Availability and Request Samples for Your Species

A species database gets you to a shortlist; the next step is confirming the species is available and looks right in your hand. As the manufacturer, we can tell you whether a species ships from regular stock or is produced to order, and send samples so you can check color and grain before you commit.

Tell us the species Shortlist

Share the species, cut and quantity you are considering.

Confirm availability Stock or order

We confirm whether it ships from regular stock or is produced to order.

Check lead time Timing

Lead time depends on the specific flitch and grade.

Match edge banding Coordinated

Each species has a matching edge banding; each pattern a coordinated color.

Request samples In hand

Compare two species side by side before you specify the run.

Request a quote Factory-direct

Get pricing for your species with availability confirmed.

RULE 01

Confirm Before You Commit

Common species ship from regular stock; figured and exotic species are produced to order. Always confirm availability, lead time and matching edge banding before you specify.

Species Shortlist
+
Sample Confirm
RULE 02

Compare Two Species Side by Side

If you are deciding between two options, request veneer samples for both. Color and grain are best judged in hand, especially for engineered patterns and figured species.

Sample Request
→
Quote Confirm
08 — FREQUENTLY ASKED QUESTIONS

Frequently Asked Questions

Answers to common questions about wood veneer species, identification, cost and engineered patterns.

Oak, walnut, cherry, maple and ash are the most common wood veneer species for furniture and interiors. Teak, sapele and ebony round out the list for high-moisture, millwork and accent applications respectively.

Oak has a prominent grain with rays and flecks and runs light to medium brown; walnut is darker, from gray-brown to chocolate, with a finer, more even grain. Oak is harder, while walnut is easier to work and prized for its rich tone.

It depends on the look and finish. Oak and ash are durable and widely stocked; walnut and cherry are chosen for a warmer, premium appearance; maple suits painted or lightly finished pieces. Most furniture buyers shortlist by color first, then confirm grain and cut.

Read the color, grain and density together: oak shows rays and flecks, sapele shows a ribbon figure, maple is fine and subtle, and density distinguishes hard species like oak and maple from softer cherry and walnut. Origin also matters, since the same species can look different by source.

Figured and rare species — burls, quarter-cut exotic species and premium grades — cost the most. Burl veneer and high-grade ebony or teak sit at the top end, driven by scarcity and the labor of producing a clean, matched face.

No. Engineered veneer is a manufactured product, not a botanical species. Patterns like Amber, Kasla and Terminalia are made from real wood fiber reassembled for consistent color and grain, and they are specified the same way a species would be.