Wood Veneer Species Database: Compare Color, Grain & Cut
Compare the species we supply by color, grain, cut and cost, so you can shortlist the right face for your product before you order.
Covers oak, walnut, cherry, ash, maple, teak, sapele and ebony, plus burl figures and engineered patterns — each with matching edge banding and typical availability.
Request SamplesCommon Species at a Glance
Wood Veneer Species Database (Browse & Compare)
Quick-reference view of our natural wood veneer species. Cost tiers are relative and depend on grade, cut and quantity, so treat them as a planning guide.
Natural, burl and
engineered patterns
| Species | Color | Grain | Common cuts | Cost tier | Matching edge banding | Typical use |
|---|---|---|---|---|---|---|
| White Oak | Light to medium brown | Prominent grain, rays and flecks | Plain, quarter, rift | Moderate | White oak | Furniture, cabinets, millwork |
| Red Oak | Pinkish to reddish-brown | Bold, arched grain | Plain, quarter, rotary | Low–moderate | Red oak | Furniture, doors, panels |
| Walnut (American) | Gray-brown to chocolate | Straight to wavy, fine | Plain, quarter | Moderate–high | Walnut | Furniture, paneling, millwork |
| Cherry (American) | Pinkish-brown, deepens to red | Fine, even, smooth | Plain, quarter | Moderate | Cherry | Cabinetry, furniture |
| Maple | Cream to light brown | Fine, subtle | Plain, rotary | Low–moderate | Maple | Cabinets, interiors |
| Ash | Light to pale brown | Bold, straight | Plain, quarter | Moderate | Ash | Furniture, doors |
| Teak | Golden to dark brown | Straight, naturally oily | Plain | High | Teak | Marine, high-moisture, luxury |
| Sapele / Mahogany | Reddish-brown | Interlocked, ribbon figure | Quarter, plain | Moderate–high | Sapele | Doors, paneling, millwork |
| Ebony | Dark brown to black | Fine, straight | Plain | High | Black | Accents, inlays, luxury |
| Burl (walnut, mappa, elm) | Figured, swirling | Clustered burl figure | Sliced, rotary | High | Coordinated | Feature panels, accents |
Common Wood Veneer Species (Quick Profiles)
Three species do most of the work in furniture and interiors: oak, walnut and cherry. The table below adds the supporting species and their key characteristics.
| Species | Character | Best for | Production note | Availability | Matching edge banding |
|---|---|---|---|---|---|
| Oak | Hard, durable; white oak light–medium brown with rays and flecks; red oak pinkish–reddish with bolder arch | Furniture faces, cabinet doors, millwork | Plain, quarter and rift cuts available; quarter-cut gives straight flake figure | Regular stock | Oak |
| Walnut | Rich dark tone; gray-brown to chocolate; fine, even grain; Claro adds darker streaking | Furniture, paneling, millwork | Usually steamed longer to even out heartwood color — confirm if color consistency matters | Regular stock | Walnut |
| Cherry | Warm pinkish-brown that deepens to rich red with age; fine, even, smooth grain | Cabinetry, high-end furniture | Graded hard on color consistency; gum pockets and streaks count against high grade | Regular stock | Cherry |
| Ash | Light with bold, straight grain; lighter, clean alternative to oak | Furniture, doors | Similar working properties to oak | Regular stock | Ash |
| Maple | Cream to light brown; fine, subtle grain; hard and stable | Cabinets, painted or lightly finished interiors | Common in production furniture | Regular stock | Maple |
| Teak | Golden to dark brown; straight grain; naturally oily | Marine, high-moisture, luxury | Moisture resistance from natural oils | Produced to order | Teak |
| Sapele | Reddish-brown; interlocked, ribbon figure | Doors, paneling, millwork | Quarters well for ribbon figure | Regular stock | Sapele |
| Ebony | Nearly black; fine, straight grain | Accents, inlays, premium details | Used in small quantities, not full faces | Produced to order | Black |
| Burl (walnut, mappa, elm) | Clustered, swirling figure | Feature walls, statement panels | Sliced or rotary cut | Produced to order | Coordinated |
Natural vs. Engineered Veneer “Species”
A useful distinction in any species database is between natural veneer and engineered veneer, because they solve different problems. Natural veneer is sliced from real logs; engineered veneer is manufactured from real wood fiber reassembled into consistent patterns.
Engineered patterns repeat
color and grain across a run
| Type | Source | Variation | Best for |
|---|---|---|---|
| Natural species | Sliced from real logs | Every flitch differs; origin matters (e.g. American vs. English walnut) | Authentic character of real wood; one-off and premium work |
| Engineered patterns | Real wood fiber reassembled | Consistent color and grain across a large run | Hotel, retail and production furniture where every panel must match |
| Pattern names | Amber, Kasla, Tang, Terminalia, Swintonia | Not botanical species — behave like a species in specification | Large runs needing repeatable appearance |
| Burl figures | Walnut, mappa, elm | Clustered, swirling figure | Feature walls and statement panels |
Patterns like Amber, Kasla and Terminalia are manufactured products, not botanical species. They are specified the same way a species would be. Ask for samples of a specific pattern to confirm its exact color, since engineered looks are best judged in person rather than from a name alone.
How to Choose a Species by Application
The right species usually comes down to three questions: what the surface has to look like, how consistent it must be, and what environment it will live in.
| Application | Recommended species | Why | Note |
|---|---|---|---|
| Furniture and cabinets | Oak, walnut, cherry, maple | Take finish well and stay consistent | Pair with matching edge banding to finish the edge |
| Feature walls and millwork | Burl, quarter-cut sapele, sequence-matched oak and walnut | Reward figure and continuity | Use where grain must run wall to wall |
| Doors and joinery | Ash, oak, sapele | Stable and flat, with coordinated banding on the edge | Common for interior and exterior joinery |
| Marine and high-moisture | Teak, or engineered patterns | Teak resists moisture naturally; engineered gives consistency without natural movement | Confirm exposure and finish requirements |
The veneer species selector walks you through it — or tell us the application and we’ll recommend a shortlist with availability.
Each natural species has a matching edge banding; each engineered pattern has a coordinated color. We supply both together so the edge and face finish as one.
Wood Species Identification (Color, Grain, and Density)
Read Color, Grain and Density Together
Being able to read a species is useful when comparing options or checking a sample. Color is the first identifier, but it varies with finish and age — cherry darkens, walnut is steamed for evenness, oak weathers to grey.
Grain tells you more: oak shows rays and flecks, sapele shows an interlocked ribbon, maple is fine and subtle. Density and hardness explain how the wood behaves.
Color
First identifier. Varies with finish and age — cherry darkens, walnut is steamed for evenness, oak weathers to grey.
Grain
Tells you more than color. Oak shows rays and flecks, sapele shows an interlocked ribbon, maple is fine and subtle.
Density and hardness
Explains how the wood behaves. Oak, maple and ash are hard and durable; walnut and cherry are medium and easier to work; teak is dense and naturally oily.
Confirm Against Reference Data
We rely on The Wood Database and the ITTO timber database for tropical species. Ask us and we’ll confirm density or Janka value for the exact panel.
Confirm Availability Before You Specify
Common species ship from regular stock; figured and exotic species are produced to order. Use this guide to set expectations before you commit.
Common Species Ship From Regular Stock
Oak, walnut, cherry, maple, ash and sapele are widely stocked and can be confirmed quickly. These are the safe choices for furniture, cabinets and interior work.
Figured and Exotic Species Are Produced to Order
Teak, ebony and burl figures are produced to order. Lead time depends on the specific flitch and grade, so confirm before you commit to a specification.
Engineered Patterns Repeat Across a Run
Engineered patterns trade natural variation for consistent color and grain across a large run. They are specified the same way a species would be, and are ideal for hotel, retail and production furniture.
Request a Sample Before You Specify
If a species looks right, request a sample to check the grain and color before you commit. Engineered looks are best judged in person rather than from a name alone.
Confirm Availability and Request Samples for Your Species
A species database gets you to a shortlist; the next step is confirming the species is available and looks right in your hand. As the manufacturer, we can tell you whether a species ships from regular stock or is produced to order, and send samples so you can check color and grain before you commit.
Share the species, cut and quantity you are considering.
We confirm whether it ships from regular stock or is produced to order.
Lead time depends on the specific flitch and grade.
Each species has a matching edge banding; each pattern a coordinated color.
Compare two species side by side before you specify the run.
Get pricing for your species with availability confirmed.
Confirm Before You Commit
Common species ship from regular stock; figured and exotic species are produced to order. Always confirm availability, lead time and matching edge banding before you specify.
Compare Two Species Side by Side
If you are deciding between two options, request veneer samples for both. Color and grain are best judged in hand, especially for engineered patterns and figured species.
Frequently Asked Questions
Answers to common questions about wood veneer species, identification, cost and engineered patterns.
Oak, walnut, cherry, maple and ash are the most common wood veneer species for furniture and interiors. Teak, sapele and ebony round out the list for high-moisture, millwork and accent applications respectively.
Oak has a prominent grain with rays and flecks and runs light to medium brown; walnut is darker, from gray-brown to chocolate, with a finer, more even grain. Oak is harder, while walnut is easier to work and prized for its rich tone.
It depends on the look and finish. Oak and ash are durable and widely stocked; walnut and cherry are chosen for a warmer, premium appearance; maple suits painted or lightly finished pieces. Most furniture buyers shortlist by color first, then confirm grain and cut.
Read the color, grain and density together: oak shows rays and flecks, sapele shows a ribbon figure, maple is fine and subtle, and density distinguishes hard species like oak and maple from softer cherry and walnut. Origin also matters, since the same species can look different by source.
Figured and rare species — burls, quarter-cut exotic species and premium grades — cost the most. Burl veneer and high-grade ebony or teak sit at the top end, driven by scarcity and the labor of producing a clean, matched face.
No. Engineered veneer is a manufactured product, not a botanical species. Patterns like Amber, Kasla and Terminalia are made from real wood fiber reassembled for consistent color and grain, and they are specified the same way a species would be.