WOOD PANEL COMPLIANCE

Wood Panel Compliance Document Checklist

A wood panel compliance document checklist is the certificate, declaration and test-report list a buyer should collect before paying for a shipment — and the exact list depends on the destination market, the product and how the panels will be used.

Pick your market and product below and the tool returns only the documents that apply, organised so you can forward the result to a supplier as a request for information.

Download Compliance Checklist
MARKET REFERENCE KEY DOCUMENTS

Compliance at a Glance

United States CARB + Lacey
European Union E1 + CE + EUDR
United Kingdom UKCA + UKDR
Japan F★★★★
01 — HOW THE CHECKLIST WORKS

What this compliance checklist does

Two selections — destination market and product type — filter the full compliance map down to what your order actually needs. Each row is marked “supplied by Vital Wood Global” or “confirmed per product and shipment”.

2 filters

Market and product define your list

Filter Options What it changes
Destination market US, EU, UK, Japan,
Middle East,
Australia / New Zealand,
global default
Formaldehyde standard, legality mechanism and CE obligations. A report that satisfies the EU may not satisfy California.
Product type Wood veneer, veneered panel,
plywood, MDF, particle board,
edge banding
Composite panels carry formaldehyde obligations that solid veneer does not; structural plywood falls under CE standards.
Application (optional) Structural or decorative Determines whether a Declaration of Performance is required for the panel.
02 — COMPLIANCE FAMILIES

What compliance documents do wood panels need?

Five families cover almost every wood panel order, and a compliant supplier file draws from all of them. No single certificate covers all five — a realistic file mixes certificates, test reports and declarations.

Certification FSC / PEFC
+
Test report CARB / E1
=
Supplier file 5 families
Family What it covers Typical document Applies to
Formaldehyde Emission limits for composite wood products Test report or third-party certificate to the correct market standard Plywood, MDF,
particle board
Wood legality & sourcing Proof the timber was legally harvested FSC, PEFC, FLEGT licence or CITES permit All wood products
CE & product performance EU Construction Products Regulation conformity Declaration of Performance backed by EN 13986, EN 636 and EN 314 Construction and
furniture panels
Chain of custody Tracking certified material from forest to finished panel CoC certificate stating the claim type — FSC 100%, FSC Mix or FSC Recycled Certified orders
Prohibited substances & recycled content Restricted substances and contaminant limits Supplier declaration plus contaminant test report Buyers with extra
due-diligence requirements
No Single Certificate Covers All Five

A compliant supplier file mixes certificates, test reports and declarations, and the mix changes by market and product — which is exactly what the checklist assembles for you.

03 — BY DESTINATION MARKET

Compliance documents by destination market

Each market enforces a different set of rules, and a document that is essential in one is irrelevant in another. Use this map as a starting point and confirm current requirements before ordering, because these rules move.

MARKETS COVERED 6 + global default

US · EU · UK · Japan
Middle East · ANZ

US CARB + Lacey
EU E1 + CE + EUDR
UK UKCA + UKDR
JP F★★★★
ME E1 report
ANZ Local emission test
Market Formaldehyde Legality & sourcing Product & CE Notes
United States CARB Phase II / EPA TSCA Title VI test report and third-party certification Lacey Act declaration (species, origin, quantity) — Label and compliance statement required on the panel; records kept 3 years
European Union E1 / EN 13986 test report EUDR due-diligence statement plus FSC or PEFC CE marking and Declaration of Performance (EN 13986, EN 636, EN 314) EUDR applies to most wood products; geolocation data required
United Kingdom UK equivalent of E1 UKDR due-diligence plus FSC or PEFC UKCA marking and DoP Diverged from EU CE after Brexit; confirm the current UKDR scope
Japan F-star rating (JIS A 5905 / A 5908) FSC or PEFC where specified — F★★★★ is the stricter, most requested rating
Middle East Supplier test report (often E1) — — Requirements vary by country and project; confirm per order
Australia / New Zealand Emission test to local standards FSC or PEFC where specified — Confirm against AS/NZS and import requirements
Confirm Before You Order

Rules move. Use this table as a starting point and confirm the current requirements with your buyer or customs broker before placing the order.

04 — FORMALDEHYDE COMPLIANCE

Formaldehyde compliance: CARB, E1, and F-star

Formaldehyde is the most heavily regulated area because composite panels are bonded with adhesives that can release it. The United States, the EU and Japan each use their own standard and test method, so a single report rarely travels between markets.

Market Standard Emission limit Test method / certification Note
United States CARB Phase II /
EPA TSCA Title VI
0.05 ppm hardwood plywood;
0.09 ppm particle board;
0.11 ppm MDF over 8 mm;
0.13 ppm MDF up to 8 mm
Third-party certifier recognised by the EPA Label must name the producer, lot number and certifier
European Union E1 / EN 13986 0.1 ppm in the test chamber EN 717-1, EN 717-2 or EN 120 Assessed under the Construction Products Regulation
Japan F-star rating
(JIS A 5905 / A 5908)
F★★★★ is the strictest class Desiccator method JIS A 1460 Most commonly requested for furniture and interiors
01
A Test Report Proves a Sample, Not Your Shipment

Ask for the report to be matched to the production batch or lot you are buying, and keep the “confirm per order” line in your supplier agreement.

02
One Report Rarely Travels Between Markets

The US, the EU and Japan use different limits and different test methods. A formaldehyde result that satisfies the EU may not satisfy California, so request the report to the standard your market actually enforces.

05 — WOOD LEGALITY & SOURCING

Wood legality: FSC, PEFC, FLEGT, and EUDR

Proving Legal Harvest Is Part of the Order, Not an Add-On

Buyers increasingly must prove the timber was legally harvested. FSC and PEFC chain-of-custody certificates are the most common evidence, with FLEGT licensing applying to certain partner countries and CITES permits required for listed species.

These mechanisms overlap but are not interchangeable. Which one your order needs depends on the destination market and the species.

SPECIFICATION RULE Certification helps demonstrate low risk. It does not replace the due-diligence statement.
01

FSC Chain of Custody

Tracks certified material from forest to finished product. The certificate states the claim — FSC 100%, FSC Mix or FSC Recycled — and covers only the certified portion of the order.

02

PEFC Chain of Custody

The other major forest-certification scheme. It works on the same principle as FSC but through national standards, and buyers often accept either depending on their own policy.

03

FLEGT Licensing

For countries with a Voluntary Partnership Agreement with the EU, a FLEGT licence proves the timber is legal. It is country-specific and not a substitute for FSC or PEFC.

04

EUDR Due Diligence

Operators placing wood products on the EU market must submit a due-diligence statement proving the material is deforestation-free, legally produced and low-risk. This requires geolocation data for every harvesting plot — a polygon for plots of 4 hectares or more, a point coordinate below that.

06 — CE MARKING

CE marking and declarations of performance

In the EU, wood-based panels used in construction fall under the Construction Products Regulation and must carry CE marking. That marking is backed by a Declaration of Performance, in which the manufacturer declares the panel’s performance against the relevant harmonized standard.

01 EN 13986 Umbrella standard
02 EN 636 Plywood specification
03 EN 314 Bonding quality
04 DoP + FPC Declaration + control
01
UMBRELLA STANDARD EN 13986 Wood-based panels in construction

EN 13986 — Wood-Based Panels

The umbrella standard for formaldehyde and performance classes. Panels placed on the EU market under the Construction Products Regulation are assessed against this standard.

02
PRODUCT STANDARD EN 636 Plywood specification

EN 636 — Plywood Specification

Sets the specification for plywood, including its exposure class. The exposure class matters wherever moisture resistance is specified for the finished panel.

03
BONDING QUALITY EN 314 Plywood bonding quality

EN 314 — Bonding Quality

Covers the bonding quality of plywood, which matters where moisture resistance is specified. Bonding performance sits behind the declared performance of the panel.

04
FORMAL STATEMENT DoP + FPC Declaration and factory control

Declaration of Performance and Factory Production Control

A DoP is not the same as a test report; it is the formal statement that links the product to the standard and the testing. Behind it sits a Factory Production Control system, which is the manufacturer’s ongoing internal control rather than a one-off certificate.

If your panels are used decoratively rather than structurally, CE may not apply — but the same supplier should still be able to provide the E1 formaldehyde result and, where relevant, the DoP. Confirm the panel’s intended use so you request the right document, not the default one.

07 — BUILD & DOWNLOAD

Build your checklist and download the spreadsheet

The value of this page is not the regulation text — it is the short, correct list for your order. Select your market and product, review the filtered checklist, and download it to share with procurement or forward to a supplier.

CARB / TSCA Title VI Confirm per order

Hardwood plywood, MDF and particle board for the US market.

Lacey Act Declaration Confirm per order

Species, origin and quantity for US-bound shipments.

E1 / EN 13986 Report Confirm per order

Formaldehyde result for EU-market composite panels.

CE Declaration of Performance Confirm per order

Backed by EN 13986, EN 636 and EN 314 where structural.

EUDR Due-Diligence Statement Confirm per order

Includes geolocation data for the harvesting plots.

FSC Chain of Custody Supplied

Claim type stated on the certificate: 100%, Mix or Recycled.

PEFC Chain of Custody Supplied

Accepted by buyers whose policy allows either scheme.

Prohibited Substances Declaration Confirm per order

Restricted substances and recycled-content contaminant limits.

RULE 01

Confirmed Per Order

FSC, PEFC, CARB, CE, EUDR-related and formaldehyde documents are available per order. We confirm the specifics — product, species and shipment — before you commit, rather than after the goods arrive.

Checklist Filtered
+
Supplier file Confirmed
RULE 02

Export and Send

Download the checklist as a spreadsheet and forward it to any supplier as a request for information, or send it to us with a quote request and we will mark each line against what we can supply.

XLSX Checklist export
OR
RFQ Quote request
08 — FREQUENTLY ASKED QUESTIONS

Frequently asked questions

Answers to common questions about wood panel compliance documents, certification and market-specific obligations.

It depends on the destination market. For the US, request CARB Phase II or EPA TSCA Title VI formaldehyde certification and a Lacey Act declaration. For the EU, request an E1 test report, a CE Declaration of Performance and an EUDR due-diligence statement. Most other markets accept FSC or PEFC chain of custody plus an emission test.

They set the same underlying formaldehyde limits, but they are separate programs. CARB Phase II is the California standard; EPA TSCA Title VI is the federal standard that largely aligned with it. A panel certified to one is usually accepted under the other, but confirm which certificate your buyer requires.

It is the formal statement an operator must submit before placing wood products on the EU market, proving the timber is deforestation-free, legally produced and low-risk. It requires geolocation data for the harvesting plots and is filed through the EUDR Information System before customs clearance.

Both certify responsible forest management and offer chain-of-custody tracking, but they are run by different organizations with different national standards. Buyers usually accept either depending on their own policy — confirm which your project specifies before ordering.

CE marking shows a wood-based panel conforms to the EU Construction Products Regulation. It is backed by a Declaration of Performance against harmonized standards such as EN 13986 for wood-based panels, EN 636 for plywood, and EN 314 for bonding quality.

Request a test report or third-party certificate showing the panel meets CARB Phase II and EPA TSCA Title VI limits — 0.05 ppm for hardwood plywood — issued by an EPA-recognized third-party certifier, with a label on the panel naming the producer, lot number and certifier.